CSDIO14R – Discrete Module – Red Lion Controls

$285.00

CSDIO- Discrete Module, Eight Inputs, Six Relay Outputs, Adds remote I/O capability to the Modular Controller series

Part #: CSDIO14R

Out of stock

SKU: CSDIO14R Categories: ,

Description

  • Adds remote I/O capability to the Modular Controller series
  • Eight input, six output digital module
  • Inputs isolated from outputs
  • Inputs independently switch selectable for sink or source signals
  • Inputs independently configurable for high or low active state
  • Inputs independently switch selectable for high or low frequency signals

The Model CSDIO series modules are digital I/O modules designed for use with the Modular Controller Series. The CSDIO14R offers eight inputs and six outputs that can be used to monitor contact or sensor inputs and actuate relays, solenoids, PLC inputs, etc.

The inputs accept standard DC inputs or contact closures, and are configured for Sink/Source signals via external switches. Additionally, each input has a switch selectable input filter that can be used to prevent contact bounce. Each input may also be software configured as a high-active or low-active input.

 

Additional information

Weight 1 lbs

Specifications

POWER: Derived from system backplane. (CSDIO draws 170 mA max. load
on power input of MASTER). Modules may be hot-swapped (replaced while
powered up).

MEMORY: Non-volatile memory retains all programmable parameters.
MASTER also stores the parameters in order to reprogram modules that
are replaced.

ENVIRONMENTAL CONDITIONS:
Operating Temperature Range: 0 to +50 °C
Storage Temperature Range: -40 to +85 °C
Operating and Storage Humidity: 85% max relative humidity, noncondensing,
from 0 to +50 °C
Vibration to IEC 68-2-6: Operational 10 to 150 Hz, 1 g.
Shock to IEC 68-2-27: Operational 25 g (10 g relay).
Altitude: Up to 2000 meter

CONSTRUCTION: Case body is burgundy high impact plastic. For indoor
use only. Installation Category II, Pollution Degree 2

CONNECTIONS: Removable wire clamp screw terminal blocks.
Wire Gage: 28-16 AWG terminal gage wire
Torque: 1.96-2.23 inch/lbs (0.22-0.25 N-m)

MOUNTING: Snaps on to standard DIN style top hat (T) profile mounting
rails according to EN50022 -35 x 7.5 and -35 x 15.

WEIGHT: 6.6 oz (187.1 g)

Documentation

CSDIO Product Manual

Modular Controller Brochure