DT800000 – RATE INDICATOR – Red Lion Controls

$89.88

5-Digit LCD, 0.6″ (15.2 mm) high digits, The unit is constructed of a lightweight, high impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed.


Part #: DT800000

SKU: DT800000 Categories: ,

Description

DT800000 Product Manual

DISPLAY: 5-Digit LCD, 0.6″ (15.2 mm) high digits.

POWER SOURCE: Internal 3.6 V lithium battery provides over 5 years of continuous service (battery life is dependent upon usage).

SIGNAL INPUT: 0 to 10 KHz from a magnetic or bi-polar output (with a 50% duty cycle). Min. input sensitivity is 0.9 V. Max. input = 28 VDC.

TIMEBASE: Adjustable in 1/256 sec (3.906 msec) increments via DIP switches located at the rear of the unit. Timebase ranges from 3.906 msec to 63.99 sec; 0.01% ±1 digit accuracy.

ENVIRONMENTAL CONDITIONS: Operating Temperature: 0 to 60 °C(Above 50 °C derate backlight operating voltage to 26 VDC max.)
Storage Temperature: -40 to 80 °C
Operating and Storage Humidity: 85% max. (non-condensing) from 0 °C
to 60 °C.
Vibration According to IEC 68-2-6: Operational 5 to 500 Hz, in X, Y, Z
direction for 1.5 hours, 5 g’s.
Shock According to IEC 68-2-27: Operational 30 g’s, 11 msec in 3 directions.
Altitude: Up to 2000 meters

CONSTRUCTION: High impact plastic case with clear viewing window (Panel gasket and mounting clip included). Installation Category I, Pollution Degree 2.

DT800000 Description

The DT800000 is a self-powered rate indicator which features selectable Timebase Increments by setting the appropriate DIP switches on the rear of the unit. The internal 3.6 VDC lithium battery will operate continuously for at least 5 years. It has a 5-digit LCD display with 0.6 inch (15.2 mm) high digits. The displays are available in positive image reflective (black digits, reflective background).

The unit is constructed of a lightweight, high impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed.

The optional Micro Line/Sensor Power Supply (MLPS1000) is designed to attach to the rear of an installed DT800000. The optional supply can be powered from 85 to 250 VAC, and can provide power for the backlighting of a unit and most sensors.

Additional information

Weight 1 lbs

Documentation

DT800000 Product Manual

Panel Meter Brochure