G3PBDP00 – Red Lion Controls

$358.20

PROFIBUS option card for G3 operator interface terminals


Part #: G3PBDP00

SKU: G3PBDP00 Category:

Description

G3PBDP00 Product Manual

This is a PROFIBUS option card for G3 operator interfaces.

POWER REQUIREMENTS:
Power is supplied to the option card from the main board of your G3 operator interface.

COMMUNICATIONS:
PROFIBUS Port: FIELDBUS TYPE : PROFIBUS-DP EN 50 170, I. The PROFIBUS port has a format and baud rates that are software programmable up to 12M baud and are digitally isolated.

CERTIFICATIONS AND COMPLIANCES:
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326: Electrical Equipment for Measurement,bControl and Laboratory use.
Immunity to Industrial Locations: Reference G3 unit for emissions and immunity specifications

ENVIRONMENTAL CONDITIONS:
Operating Temperature Range: 0 to 50°C
Storage Temperature Range: -20 to 80°C
Operating and Storage Humidity: 80% maximum relative humidity (noncondensing) from 0 to 50°C.
Altitude: Up to 2000 meters.

CONSTRUCTION: Installation Category I, Pollution Degree 2.

INSTALLATION REQUIREMENTS: Card must be installed inside the rear cover of a G3 operator interface with the hardware provided. See “Installing the G3PB Option Card” for more details.

GENERAL DESCRIPTION

The G3 proprietary expansion slot provides a high speed, parallel architecture that extends the functionality and flexibility of the G3 series HMI. This approach allows the G3 series to evolve concurrently with the latest advances in
communications and standards, without sacrificing performance. This high bandwidth channel has significantly greater throughput when compared to the traditional (external) serial gateway approach.

The G3PBDP00 option card adds PROFIBUS DP connectivity to any G3 series HMI. This allows a high speed exchange of blocks of data, at data rates up to 12 MBaud, between the hosting G3 and a Master PLC on a PROFIBUS network. The DP suffix refers to “Decentralized Periphery”, which is used to describe distributed I/O devices connected via a fast serial data link with a central controller.

The card is easily installed by removing the rear cover of your G3 operator interface, attaching the card using three screws and connecting a single cable.

  • PROFIBUS option card for G3 operator interface terminals
  • Adds PROFIBUS DP connectivity to any G3 Operator Interface
  • Powered by the G3 Operator Interface
  • Installation and Connection Hardware included with Card

Additional information

Weight 1 lbs

Documentation

G3PB Product Manual